Tutorial: Changing Dal Original Body to Obitsu Body

For changing Dal doll body, I'm choosing the Obitsu hard body 23cm white skin.

This is the Obitsu body i choose. It came with extra hands. Even though it is white body, but the color seemed to be more to flesh color.

I'm gonna change my Boa body. Her stock one is super floppy @@"

Stock body color VS Obitsu 23cm white hard body.

Remove the 3 screws at the back of the head.

Dal stock body VS Obitsu body.

Unscrew the neck "part" from the Obitsu body.

Gently pull it out.

The body should be came with this "part". Look for the biggest part as where my arrow pointed.

Now is the sawing session. Saw it half. Becareful of your hands because the "part" is quite slippery.

Then you need to saw the neck stick below. Saw about 0.7mm off.

This is the result after you saw it.

Tie up with transparent rubber band.

Leave some space at the top there so that the "part" can be slot in.

Push in the "part" that you saw just now.

Screw it back.

Apply one more rubber band so that the head wont be loose later.

Screw back everything and here it goes =)

Please leave me a comment if you have any queries. Good luck ^^,